We excavate only where necessary and restore landscaping as part of the scope.
Exterior work only pays off if the membrane, footing drain, and grading are all addressed together — fixing one without the others often leaves the underlying pressure problem unresolved. We scope the full picture before recommending excavation.
We call in utility locates before any digging starts, standard on every Marysville, WA exterior job.
Weather-dependent scheduling means we plan exterior jobs around Marysville, WA's rainy season windows when possible.
Pricing is quoted per linear foot of foundation wall being treated, based on an on-site measurement, not a phone estimate.
Membrane seams are overlapped and sealed to manufacturer spec so the barrier performs as designed for decades, not just years.
Every Marysville, WA Exterior Waterproofing job starts with an inspection, not a generic package — here's what that typically includes.
We excavate to the footing, apply a dimpled waterproof membrane directly to the foundation wall, and backfill with proper drainage material.
A perforated footing drain collects groundwater at the base of the foundation and routes it away before it can build pressure against the wall.
We regrade the perimeter to direct surface water away from the wall, typically paired with downspout extensions.
We also inspect and reseal the window frame itself while the well is open.
Downspouts discharging within a few feet of the foundation send roof water directly toward the problem — we extend them well clear of the wall.
We ask about grading, downspout placement, and where interior water is showing up to narrow down the likely exterior cause.
A technician walks the exterior perimeter, checks grading slope, and identifies where excavation would be needed for a membrane or footing drain fix.
You'll see linear footage, membrane type, and footing drain scope broken out with pricing before any digging starts.
Excavation, membrane installation, and backfill for a typical residential wall section usually take a few days depending on access and weather.
"Membrane and footing drain install took three days but the wall that used to weep every storm has been bone dry since."
— Marysville Homeowner
"They found our downspouts were dumping water two feet from the foundation. Extended them and regraded, and that alone made a noticeable difference."
— Marysville Customer
"Appreciated that they called in utility locates before digging near our gas line."
— Marysville Homeowner
"Footing drain from the original builder had failed completely. New one actually slopes correctly and moves water like it should."
— Marysville Customer
We'll recommend the right approach based on what the inspection actually finds.
We discuss landscaping impact during the estimate so there are no surprises.
Excavation typically goes down to the footing, which varies by home but is often four to eight feet depending on foundation depth.
Generally yes, since it involves excavation, but it addresses the source of water intrusion rather than managing symptoms after entry.
We'll recommend starting there if the inspection suggests surface water is the primary cause.
A typical residential wall section with membrane and footing drain work takes a few days depending on access and weather conditions.
We handle exterior excavation and membrane work throughout Marysville and the surrounding Marysville, WA service area, including the zip codes listed below.
Zip codes we serve in Marysville, WA: 98271 98270
Call now for a free inspection and a flat-rate quote before anything gets worse.
Call +1-866-476-1348© SGP Waterproofing. All rights reserved.
